What is a horizontal machining center?

Horizontal machining center is a workbench and spindle set into a flat way of processing center, horizontal machining center generally has 3 linear motion axis plus 1 table rotation axis. Horizontal machining center can be a workpiece clamping, in accordance with the program to select different tools, automatically change the speed of the spindle, according to the program writing order one by one for multiple surface multiple process flow processing, this kind of processing center is the most suitable for processing box parts.

The following introduces the use of horizontal processing center to pay attention to several key.

Installation of horizontal machining center environment

Horizontal machining centers shall be installed away from the source, avoid sunlight, no heat radiation and not humid places. If there is a seismic source near the place where the horizontal machining center is installed, shockproof ditch should be set around the horizontal machining center. If there is no shockproof ditch will directly affect the processing accuracy and stability of the horizontal machining center, a long time will affect the electrical component contact is bad, resulting in failure, affecting the stability of the horizontal machining center.

Current and voltage are strictly controlled

Horizontal machining center is usually placed in the processing workshop, and the machine tool equipment of the processing workshop, more or less lead to large power fluctuations. Therefore, the installation position of the horizontal machining center must strictly control the voltage of the current and voltage, the current and voltage of the power supply must be controlled within the scope of the horizontal machining center, must ensure that the current and voltage of the galvanic smooth, otherwise it will directly affect the normal work of the horizontal machining center.

Temperature difference and humidity will directly affect the horizontal machining center

Horizontal machining center usually to be in the environment of not more than 30 degrees Celsius to normal operation, usually under the circumstances of horizontal processing center in the distribution cabinet are installed exhaust fan and refrigerator, to ensure that the electronic parts and the central processing unit at constant temperature conditions. If the temperature and humidity is too high, the life of the components of the control system will be reduced, causing the horizontal machining center fault increase. If the humidity rises, the dust will increase on the integrated circuit chip and directly cause the failure of poor contact and short circuit.

Machine tool factory parameter Settings

When the user operates the horizontal machining center, the original basic parameters of the machining center can not be arbitrarily modified. Because those original basic parameters directly affect the dynamic characteristics of each component of the horizontal machining center, only the gap compensation parameter value can be set according to the actual situation. If you want to modify factory setting parameters, contact the manufacturer and modify factory basic parameters under the guidance of the manufacturer's professional personnel.